Device/Driver Objects and Stacks

Today I thought I’d write a bit about device stacks and driver stacks and how they implement IRPs.
I’m not going into detail on how drivers function and the types of drivers as I would be here all day so I’ll save that for another time.

What is a device object and a driver object?

A device object is an opaque structure that represents a device or function. A device object is an instance of the DEVICE_OBJECT data structure which is used by the operating system to represent a device.
Some device objects don’t always represent a physical device, they can represent a logical device.

A driver object is just a Kernel image to represent the Kernel mode driver which includes a pointer to the driver’s routines.
When a driver initialises it creates a device object to represent physical or logical devices.

Device stacks and Device nodes

The Kernel organises drivers into a tree structure called the Plug and Play device tree containing device nodes that represent devices, do note that some nodes represent software components which don’t have any physical devices attached to them.

A device stack contains a PDO (Physical Device Object) which represents the physical device connected to a physical bus on the motherboard, in this case I’ll talk about the PCI bus as an example.
The PCI bus enumerates the child devices which are connected to the PCI bus on the motherboard, this creates the PDO for each device and is then represented by a device node in the PnP device tree.
Do note that depending on your perspective determines what type of driver the pci.sys driver is, for example if you’re looking at the PCI bus device node then it’s the function driver but if you’re looking at one of the PCI bus node child devices associated with it then it’s the bus driver.

After the device node has been associated with the new PDO the PnP manager then searches the registry for the driver(s) which needs to be part of the device stack, these drivers are called Function Drivers.

Here’s a small point about the drivers usually found in device stacks:

  • Bus drivers detect and inform the PnP manager about its devices on its bus as well as controlling the power to the bus. There is only allowed to be one bus driver at once and Microsoft normally supplies them.
  • Function drivers on the other hand are the main driver that represents the device and performs the basic operations for reading and writing, it’s the driver that knows the most about its device.
  • Filter drivers modify the device behaviour when needed and it’s located above or below the function driver. It normally fixes errors that are detected before it reaches the function driver on the stack.

0: kd> !devstack fffffa8004615680
!DevObj           !DrvObj            !DevExt           ObjectName
fffffa8005f8c150  \DRIVER\VERIFIER_FILTERfffffa8005f8c2a0
fffffa8005f8c390 *** ERROR: Module load completed but symbols could not be loaded for GEARAspiWDM.sys
\Driver\GEARAspiWDM
fffffa8005f8c4e0
fffffa8005f202e0  \DRIVER\VERIFIER_FILTERfffffa8005f20430
fffffa8005eec060  \Driver\cdrom      fffffa8005f77b80  CdRom0
fffffa80057379b0  \Driver\ACPI       fffffa80047f6a00
> fffffa8004615680  \Driver\atapi      fffffa80046157d0  IdeDeviceP0T1L0-5
!DevNode fffffa8005742900 :
DeviceInst is “IDE\CdRomATAPI_iHAS124___B_______________________AL0R____\5&f437ab5&0&0.1.0”
ServiceName is “cdrom”

This is the device stack for the cd drive in the computer which shows the associated device objects and driver objects within it.

  • Atapi provides the interface to enable support for cd players.
  • ACPI is the bus filter driver that enables Power Management for the operating system so when devices are not in use (In this case the cd player) it will be powered off.
  • cdrom is the function driver for the cd drive that allows discs to be read and written to.
  • GEARAspiWDM.sys is the cdrom 3rd party filter driver.
  • VERIFIER_FILTER are filter drivers used by Driver Verifier which is enabled to monitor driver routines and operations to make sure everything is working correctly.

For more information on Driver Verifier see here: Driver Verifier (Windows Drivers)

Driver Stacks are determined by how many drivers are present when processing an IRP by passing it down a device stack or in some cases multiple device stacks.
A driver object can be associated with multiple different device objects and therefore lots of device stacks, this shows that an IRP can be passed down lots of device stacks but only being serviced by a few drivers.

0: kd> !drvobj \Driver\ACPI
Driver object (fffffa80039a6af0) is for:
\Driver\ACPI
Driver Extension List: (id , addr)

Device Object list:
fffffa80057379b0  fffffa800573a9b0  fffffa80057399b0  fffffa800572fc20
fffffa800572fe40  fffffa800572ea00  fffffa800572ec20  fffffa800572ee40
fffffa800572da00  fffffa800572dc20  fffffa800572de40  fffffa8005819e40
fffffa8005814e40  fffffa800580fe40  fffffa800572a9b0  fffffa80057289b0
fffffa8005720e40  fffffa800571c920  fffffa800571cb20  fffffa800571bc40
fffffa800571be40  fffffa8005713bc0  fffffa8005700e40  fffffa80056ffa40
fffffa80056ffc40  fffffa80056ffe40  fffffa80056fea40  fffffa80056fec40
fffffa80056fee40  fffffa80056fda40  fffffa80056fdc40  fffffa80056fde40
fffffa80056fca40  fffffa80056fcc40  fffffa80056fce40  fffffa8004616330
fffffa8004616040  fffffa8004616c20  fffffa8004616e40  fffffa80047f9770
fffffa80039eadb0  fffffa8004be1060  fffffa80047fe170  fffffa80047fe390
fffffa80047fe5b0  fffffa80047fe7d0  fffffa80047fe9f0  fffffa80047fec10
fffffa80039a7040

So as proven here we can clearly see that the ACPI.sys driver is associated with a lot of device objects as it can’t just represent one device otherwise one hardware component would use ACPI and everything else would be powered on all the time, think about how many USB devices would be turned on.
So our CD drive is just one component that uses ACPI.

Finally we can see information about the IRP being sent by looking at the IRP data structure.

0: kd> dt nt!_IRP fffff9801c458dc0
+0x000 Type             : 0n6
+0x002 Size             : 0x238
+0x008 MdlAddress       : (null)
+0x010 Flags            : 0x40000000
+0x018 AssociatedIrp    :
+0x020 ThreadListEntry  : _LIST_ENTRY [ 0xfffff980`1c458de0 – 0xfffff980`1c458de0 ]
+0x030 IoStatus         : _IO_STATUS_BLOCK
+0x040 RequestorMode    : 0 ”
+0x041 PendingReturned  : 0 ”
+0x042 StackCount       : 5 ”
+0x043 CurrentLocation  : 1 ”
+0x044 Cancel           : 0 ”
+0x045 CancelIrql       : 0 ”
+0x046 ApcEnvironment   : 0 ”
+0x047 AllocationFlags  : 0x80 ”
+0x048 UserIosb         : (null)
+0x050 UserEvent        : (null)
+0x058 Overlay          :
+0x068 CancelRoutine    : (null)
+0x070 UserBuffer       : (null)
+0x078 Tail             :

Some of the entries are pretty obvious from the name and some aren’t documented, the ones that are can be found here:

IRP (Windows Drivers)

Power IRPs

I found an old dump file which was a 0x9F Kernel dump file caused by a power IRP not synchronising with the pnp manager.
Power IRPs are used to change the power state for a device and therefore they must reach the bottom of the device stack which is the physical device object.

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.

Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa8007005660, The thread currently holding on to the Pnp lock.
Arg4: fffff800053e83d0, nt!TRIAGE_9F_PNP on Win7 and higher

So we can see our 0x9F bugcheck with a power IRP failing to synchronise with the PnP manager because the IRP hasn’t reached the bottom of the stack.

0: kd> !locks
**** DUMP OF ALL RESOURCE OBJECTS ****
KD: Scanning for held locks..

Resource @ nt!IopDeviceTreeLock (0xfffff80003492ce0)    Shared 1 owning threads
Contention Count = 1
Threads: fffffa8007005660-01
KD: Scanning for held locks.

Resource @ nt!PiEngineLock (0xfffff80003492be0)    Exclusively owned
Contention Count = 21
NumberOfExclusiveWaiters = 1
Threads: fffffa8007005660-01
Threads Waiting On Exclusive Access:
fffffa800f308b50

KD: Scanning for held locks……..
18855 total locks, 2 locks currently held

We can see two locks have been held, IopDeviceTreeLock is to synchronise the device tree as a spinlock and the PiEngineLock which is a pnp and power management lock. The PiEngineLock is being owned by the ZTEusbnet driver in order to pass down the power IRP.

0: kd> !thread fffffa80`07005660
THREAD fffffa8007005660  Cid 0004.0048  Teb: 0000000000000000 Win32Thread: 0000000000000000 WAIT: (Executive) KernelMode Non-Alertable
fffffa800d035ee8  NotificationEvent
IRP List:
fffffa8008f5cc10: (0006,03e8) Flags: 00000000  Mdl: 00000000
Not impersonating
DeviceMap                 fffff8a000008c10
Owning Process            fffffa8006f8d890       Image:         System
Attached Process          N/A            Image:         N/A
Wait Start TickCount      396427         Ticks: 38463 (0:00:10:00.026)
Context Switch Count      44059          IdealProcessor: 2  NoStackSwap
UserTime                  00:00:00.000
KernelTime                00:00:00.343
Win32 Start Address nt!ExpWorkerThread (0xfffff80003298150)
Stack Init fffff88003bd2c70 Current fffff88003bd2280
Base fffff88003bd3000 Limit fffff88003bcd000 Call 0
Priority 15 BasePriority 12 UnusualBoost 0 ForegroundBoost 0 IoPriority 2 PagePriority 5
Child-SP          RetAddr           : Args to Child                                                           : Call Site
fffff880`03bd22c0 fffff800`032845f2 : fffffa80`07005660 fffffa80`07005660 00000000`00000000 00000000`00000000 : nt!KiSwapContext+0x7a
fffff880`03bd2400 fffff800`0329599f : fffffa80`0d0df208 fffff880`0ae9e10b fffffa80`00000000 00000000`00000000 : nt!KiCommitThreadWait+0x1d2
fffff880`03bd2490 fffff880`0ae915dd : fffffa80`0d035000 00000000`00000000 fffffa80`0dd8ca00 00000000`00000000 : nt!KeWaitForSingleObject+0x19f
fffff880`03bd2530 fffff880`0ae92627 : fffffa80`0d035000 00000000`00000000 fffffa80`0c0891a0 fffff880`03bd2670 : ZTEusbnet+0x35dd
fffff880`03bd2580 fffff880`0215d809 : fffffa80`0c0891a0 fffff880`020f0ecd fffff880`03bd2670 fffffa80`091c5550 : ZTEusbnet+0x4627
fffff880`03bd25b0 fffff880`0215d7d0 : fffffa80`091c54a0 fffffa80`0c0891a0 fffff880`03bd2670 fffffa80`08fc2ac0 : ndis!NdisFDevicePnPEventNotify+0x89
fffff880`03bd25e0 fffff880`0215d7d0 : fffffa80`08fc2a10 fffffa80`0c0891a0 fffffa80`091f9010 fffffa80`091f90c0 : ndis!NdisFDevicePnPEventNotify+0x50
fffff880`03bd2610 fffff880`0219070c : fffffa80`0c0891a0 00000000`00000000 00000000`00000000 fffffa80`0c0891a0 : ndis!NdisFDevicePnPEventNotify+0x50
fffff880`03bd2640 fffff880`021a1da2 : 00000000`00000000 fffffa80`08f5cc10 00000000`00000000 fffffa80`0c0891a0 : ndis! ?? ::LNCPHCLB::`string’+0xddf
fffff880`03bd26f0 fffff800`034fb121 : fffffa80`091c7060 fffffa80`0c089050 fffff880`03bd2848 fffffa80`070bfa00 : ndis!ndisPnPDispatch+0x843
fffff880`03bd2790 fffff800`0367b3a1 : fffffa80`070bfa00 00000000`00000000 fffffa80`0dc19990 fffff880`03bd2828 : nt!IopSynchronousCall+0xe1
fffff880`03bd2800 fffff800`03675d78 : fffffa80`09196e00 fffffa80`070bfa00 00000000`0000030a 00000000`00000308 : nt!IopRemoveDevice+0x101
fffff880`03bd28c0 fffff800`0367aee7 : fffffa80`0dc19990 00000000`00000000 00000000`00000003 00000000`00000136 : nt!PnpSurpriseRemoveLockedDeviceNode+0x128
fffff880`03bd2900 fffff800`0367b000 : 00000000`00000000 fffff8a0`11d1c000 fffff8a0`049330d0 fffff880`03bd2a58 : nt!PnpDeleteLockedDeviceNode+0x37
fffff880`03bd2930 fffff800`0370b97f : 00000000`00000002 00000000`00000000 fffffa80`09122010 00000000`00000000 : nt!PnpDeleteLockedDeviceNodes+0xa0
fffff880`03bd29a0 fffff800`0370c53c : fffff880`03bd2b78 fffffa80`114ab700 fffffa80`07005600 fffffa80`00000000 : nt!PnpProcessQueryRemoveAndEject+0x6cf
fffff880`03bd2ae0 fffff800`035f573e : 00000000`00000000 fffffa80`114ab7d0 fffff8a0`123a25b0 00000000`00000000 : nt!PnpProcessTargetDeviceEvent+0x4c
fffff880`03bd2b10 fffff800`03298261 : fffff800`034f9f88 fffff8a0`11d1c010 fffff800`034342d8 fffff800`034342d8 : nt! ?? ::NNGAKEGL::`string’+0x54d9b
fffff880`03bd2b70 fffff800`0352b2ea : 00000000`00000000 fffffa80`07005660 00000000`00000080 fffffa80`06f8d890 : nt!ExpWorkerThread+0x111
fffff880`03bd2c00 fffff800`0327f8e6 : fffff880`03965180 fffffa80`07005660 fffff880`0396ffc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03bd2c40 00000000`00000000 : fffff880`03bd3000 fffff880`03bcd000 fffff880`03bd2410 00000000`00000000 : nt!KxStartSystemThread+0x16

0: kd> !irp fffffa8008f5cc10
Irp is active with 10 stacks 10 is current (= 0xfffffa8008f5cf68)
No Mdl: No System Buffer: Thread fffffa8007005660:  Irp stack trace.
cmd  flg cl Device   File     Completion-Context
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 1b,17]   0  0 fffffa800c089050 00000000 00000000-00000000
\Driver\ZTEusbnet
Args: 00000000 00000000 00000000 00000000

I’m not sure why but the ZTEusbnet driver isn’t processing the power IRP, it’s just leaving it and that’s what caused the system to crash.
It’d be nice to know exactly why it didn’t pass the power IRP on.
I’m not suprised though given the date of the driver.

0: kd> !devstack fffffa800c089050
!DevObj           !DrvObj            !DevExt           ObjectName
> fffffa800c089050  \Driver\ZTEusbnet  fffffa800c0891a0  NDMP14
fffffa80070bfa00  \Driver\usbccgp    fffffa80070bfb50  000000a8
!DevNode fffffa800dc19990 :
DeviceInst is “USB\VID_19D2&PID_0063&MI_04\6&200b5242&0&0004”
ServiceName is “ZTEusbnet”

We can see that it was meant to pass the power IRP down to the USB common class generic parent driver which, to put it simply exposes each USB composite device in order to seperate it to a single device. Passing it down to the USB bus driver should change the power state.

0: kd> lmvm ZTEusbnet
start             end                 module name
fffff880`0ae8e000 fffff880`0aebc000   ZTEusbnet   (no symbols)
Loaded symbol image file: ZTEusbnet.sys
Image path: \SystemRoot\system32\DRIVERS\ZTEusbnet.sys
Image name: ZTEusbnet.sys
Timestamp:        Mon Oct 13 06:50:10 2008 (48F2E192)
CheckSum:         000329ED
ImageSize:        0002E000
Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

This is a dump file from quite a while ago but if memory serves me correctly I think an update solved the issue.

Any other questions feel free to ask, I believe I’ve covered most things without going into detail about drivers.

Sources: Device nodes and device stacks (Windows Drivers)
Driver stacks (Windows Drivers)

0x133 DPC_WATCHDOG_VIOLATION

I’ve not posted in a while but I found an interesting case on a forum and managed to acquire a Kernel memory dump.
I’m not going into detail about DPCs or interrupts as I have made blog posts on these in the past.

DPC_WATCHDOG_VIOLATION (133)
The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL
or above.
Arguments:
Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
    component can usually be identified with a stack trace.
Arg2: 0000000000000501, The DPC time count (in ticks).
Arg3: 0000000000000500, The DPC time allotment (in ticks).
Arg4: 0000000000000000

So here it states that we encountered a DPC which exceeded the allocated time for it to finish executing. The problem is that it went over this time, and as stated before DPCs can hold up the system when taking too long to execute which can result in lagging, a slow system or even sound cutting out.

So lets look at our stack trace.

ffffd001`50c93c98 fffff800`9238bcc2 : 00000000`00000133 00000000`00000000 00000000`00000501 00000000`00000500 : nt!KeBugCheckEx
ffffd001`50c93ca0 fffff800`92271115 : 00000000`00000000 00000000`00000000 00000000`00000000 fffff801`dceabf17 : nt! ?? ::FNODOBFM::`string’+0x18b12
ffffd001`50c93d30 fffff800`929a07b5 : ffffe001`00400a02 fffff800`922fcae6 fffff801`daed3cf8 ffffe001`00008201 : nt!KeClockInterruptNotify+0x95
ffffd001`50c93f40 fffff800`922e80e3 : ffffd001`50c93f60 00000000`00000008 ffff5377`5487cf7d 00000000`0000000c : hal!HalpTimerClockIpiRoutine+0x15
ffffd001`50c93f70 fffff800`9236412a : ffffe001`9c600500 ffffe001`9e8de1a0 00000000`00000000 00000000`00000000 : nt!KiCallInterruptServiceRoutine+0xa3
ffffd001`50c93fb0 fffff800`92364a9b : 44454c49`4146203a 696c6564`206f7420 6e657665`20726576 20212121`20352074 : nt!KiInterruptSubDispatchNoLockNoEtw+0xea
ffffd001`50c853a0 fffff800`922e8383 : ffffe001`9e92d030 ffffe001`9e968030 00000000`02290a8d 00000000`00000018 : nt!KiInterruptDispatchNoLockNoEtw+0xfb
ffffd001`50c85530 fffff801`dcfa5751 : ffffe001`9e66e7a0 ffffe001`00000000 ffffe001`9e92fbe0 00000000`fffff850 : nt!KeAcquireSpinLockRaiseToDpc+0x13
ffffd001`50c85560 fffff801`dcfa531d : ffffe001`9e96b840 fffff801`dcf2c48f ffffe001`9eb68490 fffff801`dcf2c550 : athwbx+0x161751
ffffd001`50c855f0 fffff801`dcf60c42 : ffffe001`9e96b840 ffffd001`50c85650 ffffd001`50c85654 00000000`00000000 : athwbx+0x16131d
ffffd001`50c85630 fffff801`dcf33472 : ffffe001`9e9bf030 fffff801`00000000 ffffd001`50c856d0 fffff801`dd074319 : athwbx+0x11cc42
ffffd001`50c85680 fffff801`dd0c129f : ffffe001`9e9bf030 ffffffff`ffffffff ffffe001`9e6d97e8 fffff801`dd011189 : athwbx+0xef472
ffffd001`50c856f0 fffff801`dd08679e : ffffe001`9e968030 00000000`00000000 00000000`00000000 00000000`00000000 : athwbx+0x27d29f
ffffd001`50c85720 fffff801`dae9e81e : ffffe001`9e961030 00000000`00000000 ffffd001`50c85790 00000000`00000000 : athwbx+0x24279e
ffffd001`50c85760 fffff800`92252130 : ffffd001`50c85b00 00000000`00000000 00000000`00000200 fffff800`92274ae0 : ndis!ndisInterruptDpc+0x269ce
ffffd001`50c85860 fffff800`9225134b : ffffd001`50c5c180 ffffe001`9e8f4010 ffffe001`9c46b900 ffffe001`a12f3080 : nt!KiExecuteAllDpcs+0x1b0
ffffd001`50c859b0 fffff800`923667ea : ffffd001`50c5c180 ffffd001`50c5c180 ffffd001`50c682c0 ffffe001`9dbbb540 : nt!KiRetireDpcList+0xdb
ffffd001`50c85c60 00000000`00000000 : ffffd001`50c86000 ffffd001`50c80000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a

So in this callstack we see our processor in an idle loop, when idle it tends to execute any DPCs if there are any waiting in the DPC queue.
It begins to execute all the DPCs in the queue (also known as draining) when get execute an [B]ndis dpc interrupt[/B], this begins to call network functions and then acquire a spinlock and raise to DPC/Dispatch IRQL level if it hasn’t already (this is the standard routine that is used, I can’t remember if it is required), we then recieve more interrupts followed by a clock interrupt and a bugcheck.

Okay so we know that we bugchecked because a DPC was taking too long to finish executing and risk holding up the system, especially where spinlocks are concerned.

The main thing that interests me is why is there a clock interrupt?

3: kd> !dpcs
CPU Type      KDPC       Function
 3: Normal  : 0xffffe0019e66e880 0xfffff801dae78eb0 ndis!ndisMTimerObjectDpc
 3: Normal  : 0xffffd00150c61668 0xfffff80092327b28 nt!PpmPerfAction
 3: Normal  : 0xffffd0015589a280 0xfffff80092258854 nt!PopExecuteProcessorCallback
 3: Threaded: 0xffffd00150c617c0 0xfffff8009231a0a0 nt!KiDpcWatchdog

I believe the ndis dpc interrupt is related to this timer object but I may be wrong, if it is related then the clock interrupt makes sense as the system requires intervals for clock interrupts to take place in order to keep track of system time and logical run time for threads and timers. Processes can modify the clock interrupt interval for their needs to process timers much quicker, I’ll not go into detail as I will talk about timers another time.

The only problem is that I ran into a dead end, I couldn’t find anything related to the network driver in terms of modifying the clock interrupt timer.

3: kd> !list “-e -x \”dt nt!_EPROCESS @$extret-@@(#FIELD_OFFSET(nt!_EPROCESS, TimerResolutionLink)) ImageFileName SmallestTimerResolution RequestedTimerResolution\” nt!ExpTimerResolutionListHead”
dt nt!_EPROCESS @$extret-@@(#FIELD_OFFSET(nt!_EPROCESS, TimerResolutionLink)) ImageFileName SmallestTimerResolution RequestedTimerResolution
   +0x438 ImageFileName            : [15]  “???”
   +0x638 RequestedTimerResolution : 0x9c3d2000
   +0x63c SmallestTimerResolution  : 0xffffe001

dt nt!_EPROCESS @$extret-@@(#FIELD_OFFSET(nt!_EPROCESS, TimerResolutionLink)) ImageFileName SmallestTimerResolution RequestedTimerResolution
   +0x438 ImageFileName            : [15]  “svchost.exe”
   +0x638 RequestedTimerResolution : 0
   +0x63c SmallestTimerResolution  : 0x2710

So I thought I’d look into this a bit more.

3: kd> u ndis!ndisInterruptDpc+0x269ce
ndis!ndisInterruptDpc+0x269ce:
fffff801`dae9e81e 488b75a7        mov     rsi,qword ptr [rbp-59h]
fffff801`dae9e822 e9e297fdff      jmp     ndis!ndisInterruptDpc+0x1b9 (fffff801`dae78009)
fffff801`dae9e827 33d2            xor     edx,edx
fffff801`dae9e829 488d4dd7        lea     rcx,[rbp-29h]
fffff801`dae9e82d 448d420d        lea     r8d,[rdx+0Dh]
fffff801`dae9e831 e8160c0000      call    ndis!ndisPcwEndCycleCounter (fffff801`dae9f44c)
fffff801`dae9e836 90              nop
fffff801`dae9e837 e9d797fdff      jmp     ndis!ndisInterruptDpc+0x1c3 (fffff801`dae78013)

It appears the interrupt routine is looping for some reason.

I can’t find anything on the cycle counter function as it is undocumented but I’ll take a guess and say that it’s keeping track of the time the interrupt has been executing, AFAIK this is don’t by using a counter on the currently executing thread to see how long it’s running.

3: kd> u nt!KeAcquireSpinLockRaiseToDpc+0x13
nt!KeAcquireSpinLockRaiseToDpc+0x13:
fffff800`922e8383 f605fcac270021  test    byte ptr [nt!PerfGlobalGroupMask+0x6 (fffff800`92563086)],21h
fffff800`922e838a 751f            jne     nt!KeAcquireSpinLockRaiseToDpc+0x3b (fffff800`922e83ab)
fffff800`922e838c f0480fba2900    lock bts qword ptr [rcx],0
fffff800`922e8392 7209            jb      nt!KeAcquireSpinLockRaiseToDpc+0x2d (fffff800`922e839d)
fffff800`922e8394 0fb6c3          movzx   eax,bl
fffff800`922e8397 4883c420        add     rsp,20h
fffff800`922e839b 5b              pop     rbx
fffff800`922e839c c3              ret

Here we can see the same DPC interrupt routine trying to acquire a spinlock yet it’s not managing to do it and therefore looping all whilst it is still running at DPC level and therefore preventing normal thread execution.

Eventually it seems it managed to acquire the spinlock and then call a clock interrupt in order to perform some operation, I suspect updating the system time in order to service the network driver with higher response times.
The system realised that it was taking too long to complete and therefore bugchecked.

3: kd> lmvm athwbx
start             end                 module name
fffff801`dce44000 fffff801`dd1ff000   athwbx     (no symbols)          
    Loaded symbol image file: athwbx.sys
    Image path: \SystemRoot\system32\DRIVERS\athwbx.sys
    Image name: athwbx.sys
    Timestamp:        Thu Oct 17 10:46:01 2013 (525FB1D9)
    CheckSum:         003BC161
    ImageSize:        003BB000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

So the network driver was quite outdated, he updated it and the blue screens stopped so it looks like it was an easy fix.

Thanks for reading.